Adaptec® AHA-2940U SCSI adapter
Linux Compatibility Testing Results
Test Completed: 09-09-1999

Adaptec® AHA-2940U SCSI adapter is awarded the AppLabs Linux Compatibility mark.

AppLabs' www.Linux-Tested.com compatibility testing of this adapter showed distributions compatible with this adapter.

Caldera OpenLinux 2.2

This document presents the compatibility testing results.

Host Bus Adapter Configuration

The following table defines the configuration tested by AppLabs.

Testing Results

The following table provides the pass/fail results.

Tests and determinations are available for reference in ASCII format for immediate viewing.

Network Adapter Configuration as Tested
Company	Adaptec
Model	Adaptec® AHA-2940U SCSI adapter
Description	Adaptec® AHA-2940U SCSI adapter
Test Environment	IBM® Mpro Dual Pentium® III 500 Mhz with 256 MB RAM. Two SCSI hard drives: IBM® PCCO DDRS-39130W supplied with the Mpro as sdb, and a Seagate® ST32250W as sda. The drives switched between sdb and sda. The installation cdrom was run off the internal IDE controller but no IDE harddrive was used. All software was run directly form the SCSI drives. Unless specifically noted, the test file written by the bonnie test program was 600 Mbytes. The large size was used to avoid any caching.

Legal

AppLabs makes no warranty, either expressed or implied, regarding the information or lack thereof present in this document or in the documents it references.

Test	Result
Card Detection:	PASSED
Driver Installation:	PASSED
Drive Preparation:	PASSED
Format:	PASSED
Bottleneck:	PASSED
Multiple Device:	PASSED
Multiple Cards and Drives:	PASSED
Software RAID:	PASSED