<
AppLabs
Testing Results
Linux Compatibility TestedAvocent AutoView 2000R
Linux Compatibility Testing Results


March 15, 2004

This document presents the results of the Linux Compatibility tests, which included the testing of Mandrake 9.2, Redhat Enterprise Server 3.0, TurboLinux Desktop 1.0, and SuSE 9.0 with the Avocent AutoView 2000R.


AppLabs' Linux compatibility testing of this system showed the Avocent AutoView 2000R to be compatible with Mandrake 9.2, Redhat Enterprise Server 3.0, TurboLinux Desktop 1.0, and SuSE 9.0. The Avocent AutoView 2000R is awarded the AppLabs Linux Compatibility mark.

System Configuration

The following table defines the system configuration tested by AppLabs.

KVM Hardware Tested
The Avocent AutoView 2000R is a Sixteen-port KVM switch. Cables used for testing were standard CAT 5 cables connected to the provided AVRIQ KVM adapters.

This document covers the setup and testing of the Avocent AutoView 2000R KVM unit in the context of a Linux environment. The testing attempts to ensure that the unit will function as advertised when used with the Linux OS.

All testing of the AutoView 2000R was done in a mixed OS environment.

Other Hardware

Video Monitor: Dell UtlraScan P780 color monitor
Mouse: IBM PS/2 mouse
Keyboard: IBM standard keyboard CPU 1, Generic Pentuim IV 2.4GHz, 512 MB RAM, 40 GB hard drive for Linux distributions.
CPU 2, Generic Pentuim II 400MHz, 64 MB RAM, 4 GB hard disk for Microsoft Windows 2000 platform.

Testing Results

The following table provides the pass/fail result for the hardware as tested in this system by AppLabs.

INSTALL THROUGH TEST
install Linux on one or more CPUs while connected to the AutoView 2000R.PASS
Notes: All four distributions installed through the KVM with no problems.

POWER CYCLE
verify the AutoView 2000R is state-independent of its controlled CPUs.PASS
Notes: Power cycling indicated no problems with any of the Linux Distributions.

Switching Commands Testing

HOT KEY SWITCHING
to verify switching works with Linux keyboard drivers.PASS
Notes: This feature was tested via the Print Screen and Backspace keystokes.
AUTO SWITCHING
to verify auto switching works with Linux drivers.N/A
Notes: This feature is not supported on this device.

PS/2 or SERIAL MICE POINT, CLICK, DRAG
verify the functioning of the mouse as the KVM switches between the various CPUsPASS
Notes: Mouse performed well with no negative effects when being switched between the connected CPUs.

Monitor Testing

DISPLAY RESOLUTION TEST
verify the stability of cycling through the various CPUs with X operating on each and at different resolutionsPASS
Notes: The Linux distributions worked at various screen resolutions.
MONITOR ON/OFF TEST
Verify the stability of the displays on the various CPUs when the KVM monitor is turned off and on during cyclingPASS
Notes: The power state of the monitor did not effect the state of the CPUs.

IDLE TIME TEST
Verify the KVM can recover from idle periods without loss of keyboard, monitor or mouse contact.PASS
Notes: The KVM was unaffected by periods of idle time and remained functional.

Multiple OS Test

With Microsoft Windows 2000
verify the continued functionality of the connected CPUs and KVM units when running different operating systems on one or more of the connected CPUsPASS
Notes: The KVM showed no adverse effects when switched between the various OSes and remained functional.

Legal

AppLabs makes no warranty, either expressed or implied, regarding the information or lack thereof present in this document or in the documents it references.




385 South 520 West, Lindon, Utah, 84042
801.852.9500 -- 801.852.9501 (fax)
Copyright © 2004, AppLabs ™