This document presents the results of the Linux Compatibility test, which included the installation of Redhat 7.2 on the SuperMicro 6021F SuperServer.

AppLabs' Linux compatibility testing of this system showed the 6021F SuperServer to be compatible with Redhat 7.2. The 6021F is awarded the AppLabs Linux Compatibility mark.

System Configuration

The following table defines the system configuration tested by AppLabs.

System Configuration
SuperMicro 6021F SuperServer
The BIOS revision	AMIBIOS 7.00.xx

Testing Results

The following table defines the hardware as tested in this system by AppLabs, and provides the pass/fail results.

Test	Comment	Result
Installation Testing
CD-ROM Installation		PASSED
NFS Installation		PASSED
Device Auto Probing		PASSED
System Setup
Kernel Compatibility		PASSED
LILO Compatibility		PASSED
XWindows Compatibility		PASSED
I/O Sanity
Heavy disk I/O Testing	Eight+ hours load time	PASSED
Network Server Load Testing	Eight+ hours load time	PASSED
SMP Multi-Processors
SMP Testing		PASSED
Display Adapter
Console Compatibility		PASSED
X Display Compatibility		PASSED
Serial Ports
Kernel Detection		PASSED
Setserial Compatibility		PASSED
Throughput Testing		PASSED
Parallel Ports
Kernel Detection		PASSED
Compatibility Testing		PASSED
Mouse Ports
Kernel Detection		PASSED
Compatibility Testing		PASSED
Other
Pointing Device		PASSED
Keyboard		PASSED

Hardware Details

The following table defines the hardware configuration details for the tested system.

Hardware Configuration Information
Motherboard and Processor	The system tested contained two (2) Intel Pentium IV processors clocked at 1.2 GHz on a SuperMicro main board.
Display Adapters	ATI Rage using the Mach64 driver.
I/O Busses	The system includes a standard 1.44 MB floppy drive interface. There are ports for PS/2 style keyboard and mouse. The tested system included one (1) Quantum Atlas IV 9 SCA hard drive on an Adaptec AIC-7899 SCSI host adapter. There is one (1) AGP port, six (6) PCI ports, and two (2) USB ports.
Network Interface	System as tested contained one (1) onboard Intel i82557/i82558 NIC interfaces.
Included Peripherals	The included CD-ROM drive is a Matshita CR-177 ATAPI CD-ROM IDE drive. The system was tested with a Dell Quietkey keyboard (104-key standard) and a generic 3-button PS/2 mouse.
Miscellaneous Hardware	There are two standard 16550A serial ports. There is one standard bi-directional parallel port. There is one 1.44 megabyte floppy drive.

Legal

AppLabs makes no warranty, either expressed or implied, regarding the information or lack thereof present in this document or in the documents it references.