This document presents the results of the Linux Compatibility test, which included the installation of Redhat 6.2 on the SuperMicro 8060 Server.

AppLabs' Linux compatibility testing of this system showed the 8060 Server to be compatible with Redhat 6.2. The 8060 is awarded the AppLabs Linux Compatibility mark.

System Configuration

The following table defines the system configuration tested by AppLabs.

System Configuration
SuperMicro 8060 Server
The BIOS revision	AMIBIOS R1.3

Testing Results

The following table defines the hardware as tested in this system by AppLabs, and provides the pass/fail results.

Test	Comment	Result
Installation Testing
CD-ROM Installation		PASSED
NFS Installation		PASSED
Device Auto Probing		PASSED
System Setup
Kernel Compatibility		PASSED
LILO Compatibility		PASSED
XWindows Compatibility		PASSED
I/O Sanity
Heavy disk I/O Testing	Run for over eight hours	PASSED
Network Server Load Testing	Run for over eight hours	PASSED
SMP Multi-Processors
SMP Testing		PASSED
Display Adapter
Console Compatibility		PASSED
X Display Compatibility		PASSED
USB Interfaces		N/A
Serial Ports
Kernel Detection		PASSED
Setserial Compatibility		PASSED
Throughput Testing		PASSED
Parallel Ports
Kernel Detection		PASSED
Compatibility Testing		PASSED
Mouse Ports
Kernel Detection		PASSED
Compatibility Testing		PASSED
Other
Pointing Device		PASSED
Keyboard		PASSED

Hardware Details

The following table defines the hardware configuration details for the tested system.

Hardware Configuration Information
Motherboard and Processor	The system tested contained four (4) Intel Pentium II Xeon processors clocked at 700 MHz. System was tested with 1 GB RAM.
Display Adapters	There is an ATI onboard video chip.
I/O Busses	The system includes a standard 1.44 MB floppy drive interface. There are ports for PS/2 style keyboard and mouse. The tested system included four (4) Quantum Atlas 9SCA SCSI hard drives. There are Zero (0) ISA slots; six (6) 64-bit PCI slots; no AGP slot; and, two USB ports.
Network Interface	There is an onboard 3COM 590c NIC interface.
Included Peripherals	The included CD-ROM drive is a Matshita CR-176 IDE drive. The system was tested with a Dell Quietkey keyboard (101-key standard) and a generic 3-button PS/2 mouse.
Miscellaneous Hardware	There is one standard 16550A serial port. There is one bi-directional parallel port. There is one 1.44 megabyte floppy drive.

Related Notes

Legal

AppLabs makes no warranty, either expressed or implied, regarding the information or lack thereof present in this document or in the documents it references.